DIGITRONIC 3D iQ8
Description
DIGITRONIC 3D iQ 8 is a powerful and modern 56-pin control unit with a 32-bit processor. It incorporates all advanced technologies and the latest developments in the gas and automotive industry. The most characteristic features include:
- Additional injection of gasoline (card) – the ability to add gasoline at the same time as the gas injection in different card ranges. The dose of gas decreases in proportion to the added dose of gasoline
- The ability to read the signal RPM from the injection pulse of petrol injectors
- The iQ 3D connector (6-8 cyl) is the same as the DIGITRONIC 3D-S Power (6-8 cyl). It makes it possible to service and change previously installed units (without wiring replacement)
- Auto-adaptation of ISA 3 – auto-adaptation algorithm, which regularly adjusts the dose of gas during the ride. The controller adjusts the dose of gas based on the pre-assembled fuel injection time map
- Recognition of closed-loop and open-loop modes in real time
- Each cylinder bank has a separate correction card (Bank 1, Bank 2)
- Tests have shown that the use of ISA 3 practically approximates the gas consumption to the consumption of gasoline
- Adaptation OL (Open Loop) – corrections are made as in the mode of “closed loop” (Close Loop), and that is very important in the mode of “open loop” (Open Loop)
- Digital recorder (graphic oscilloscope) of the impulses of petrol injectors, gas injectors and engine speed signal. Allows real-time visual observation of the operation of injection pulses, the correspondence of the phase between the gasoline and gas impulses
- Automatic configuration of the injection sequence – automatic determination of the conformity of the gasoline connection to the gas injector and their redistribution. Used in case of incorrect installation
Set
- DIGITRONIC IQ3D8.
- Switch with level indicator.
- horn signal.
- PT-MAP sensor.
- Harness with waterproof plugs.
- Waterproof fuse box.
- clamps.
- manifold nozzle.
- vacuum T-connector.
Warranty
24 months warranty from the date indicated on the product.
IMPORTANT!
The warranty applies only when the installation of the kit was made in the certified by the DIGITRONIC conversion center.
Best to fit with
![](https://ua.digitronicgas.com/wp-content/uploads/2017/03/xHOME-PAGE-INNA-WERSJA-07-03-new_03.jpg.pagespeed.ic.Z7QWcJMUlu.jpg)